MAK HBR™ Technology

Proprietary engineering. Integrated biological treatment. Advanced water reuse.

MAK HBR™ (Hybrid Bio Reactor) is a proprietary sewage treatment platform developed by MAK India Limited. It integrates MAK HDC, MAK UFF, MAK-ABD™ Anaerobic Biodigester, DO-controlled aerobic treatment, MAK Fine Filter and optional advanced polishing technologies into a unified treatment system.

The technology is designed to reduce sludge accumulation, support stable biological treatment, optimize selected operating functions and produce treated water suitable for intended reuse applications when the required standards are achieved.

One system. Eight stages.

  1. Sewage inlet & screening
  2. Receiving tank + MAK HDC
  3. MAK UFF: inert and grit separation
  4. MAK-ABD™ anaerobic digestion
  5. DO-controlled aerobic treatment
  6. Filter feed tank + MAK Fine Filter
  7. Optional UF / UV / AOP / chlorination
  8. Treated water for approved reuse
Clarifier-freeNo separate secondary clarifier
Less sludgeReduced routine handling
PLC + optional SCADASimpler monitoring
How MAK HBR™ works

From incoming sewage to reusable treated water.


Treatment begins with preliminary screening and wastewater collection. MAK HDC supports pretreatment, while MAK UFF separates inert and grit materials before the biological stages. MAK-ABD™ anaerobic processing and DO-controlled aerobic treatment support organic matter degradation and stabilization. The effluent then passes through filtration and, where required, additional polishing and disinfection.

Process stageTreatment role
01Preliminary screening and wastewater collectionScreening and collection
02MAK HDCProprietary wastewater pretreatment
03MAK UFFInert and grit separation
04MAK-ABD™Anaerobic digestion and stabilization
05DO-controlled aerobic treatmentBiological treatment and oxygen control
06MAK Fine FilterFiltration after biological treatment
07Optional polishing / disinfectionUF, UV, AOP and/or chlorination as required
08Treated waterIntended reuse, subject to required standards

Stage 02 · MAK HDC

MAK HDC technology

Hydro Dynamic Cavitation – proprietary pretreatment innovation


The MAK HDC device applies a hydrodynamic treatment principle to support wastewater pretreatment and biodegradability enhancement. It is integrated ahead of subsequent treatment stages.

02

Key functions

  • Hydrodynamic wastewater pretreatment
  • Support for biodegradability enhancement
  • Integration with downstream biological treatment
  • Proprietary engineering within the MAK HBR™ process
Stage 03 · MAK UFF

MAK UFF technology

Reducing inert loads before biological treatment


MAK UFF is a proprietary unit designed to separate and collect sand, grit and other inert matter before wastewater enters the biological stages. Reducing inert loading helps limit unwanted material accumulation in downstream treatment units.

03

Key advantages

  • Grit and inert separation
  • Reduction of inert loading
  • Protection of downstream process stages
  • Integrated pretreatment arrangement
Stage 04 · MAK-ABD™

MAK-ABD™ anaerobic treatment

Harnessing beneficial bacteria for biological digestion


The MAK-ABD™ Anaerobic Biodigester uses biological processes to support breakdown and stabilization of biodegradable organic matter. It integrates anaerobic digestion with downstream controlled aerobic treatment and builds upon MAK’s ABD-based sanitation experience.

04

Key advantages

  • Biological organic matter degradation
  • Anaerobic stabilization
  • Integration with MAK AMI biological technology
  • Reduced sludge-handling objectives
Stage 05 · DO-controlled aerobic

DO-controlled aerobic treatment

Intelligent aeration for optimized sewage treatment


The aerobic treatment stage uses dissolved oxygen (DO) monitoring and control to support biological stabilization and optimize oxygen delivery. DO-based controls allow aeration equipment to respond to operating requirements within the designed control logic.

05

Key features

  • DO monitoring
  • Controlled oxygen supply
  • Optimized blower operation
  • Biological process stabilization
  • Integration with PLC-based automation
Stage 06 · MAK Fine Filter

MAK Fine Filter

Dedicated filtration for improved treated-water quality


The MAK Fine Filter provides an additional filtration stage to improve effluent quality following biological treatment. Filtered water may subsequently undergo selected polishing and disinfection based on the required final quality.

06

Key functions

  • Dedicated tertiary filtration
  • Improvement of treated-water quality
  • Integration with advanced polishing stages
  • Support for intended reuse applications
Stage 07 · Optional

Advanced water polishing & disinfection

Treatment options tailored to water reuse requirements


MAK HBR™ offers configurable advanced treatment technologies. Selection depends on wastewater quality, final treated-water requirements and project specifications.

Ultrafiltration (UF)

Additional membrane-based filtration.

UV system

Ultraviolet disinfection.

MAK AOP

Advanced oxidation and supplementary polishing.

Chlorination

Chemical disinfection.

Combined treatment

Multiple barriers selected for the required application.


Important: not every configuration requires all polishing technologies.

Automation

Smart automation & process control

Smarter monitoring. Simplified operations.


MAK HBR™ incorporates DO-controlled aeration and PLC-based monitoring to support process control and day-to-day operation. Optional SCADA integration can provide expanded monitoring and supervision according to project requirements.

Control features

PLC-based process monitoring
DO-based aeration control
Pump and blower operation integration
Process-status monitoring
Optional SCADA system
Technical evaluation

Engineering each STP around its application.


MAK HBR™ designs are developed according to site-specific technical requirements. The assessment considers the following factors:

1

Design flow in KLD

2

Influent characteristics

3

Hydraulic and organic loading

4

Site dimensions

5

Reuse objectives

6

Relevant standards

7

Automation scope

8

Anticipated operating requirements

A project-specific technical assessment determines the final configuration and equipment selection.

Request a technical assessment
Technology comparison

MBR vs SBR vs MBBR vs MAK HBR™

Understanding the difference in sewage treatment technologies


Conventional treatment systems use different biological treatment and separation approaches.

TechnologyTreatment approach
MBRBiological treatment integrated with membrane separation
SBRBiological treatment operating through sequential treatment cycles
MBBRBiological treatment using moving biofilm carriers
MAK HBR™Integrated proprietary pretreatment, anaerobic digestion, DO-controlled aerobic treatment, fine filtration and optional advanced polishing

The MAK HBR™ platform is positioned around the combination of proprietary pretreatment, clarifier-free process design, sludge minimization, smart aeration and configurable water reuse.

Actual footprint, lifecycle cost, sludge generation and effluent performance must be evaluated against project-specific design conditions.

See how MAK HBR™ compares for your project.